Kirby Avalir 2 G10B2 Vacuum Cleaner Manual

The Kirby Avalir 2 G10B2 is a powerful and versatile vacuum cleaner designed for deep cleaning carpets and hard floors. It features a range of attachments for various cleaning tasks, including a carpet shampoo system, upholstery tool, and a dusting brush. The vacuum operates with a powerful motor and includes a HEPA filtration system to capture allergens and dust particles. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Powerful motor, HEPA filtration, carpet shampoo system, various cleaning attachments.

FeatureDescription
HEPA FiltrationCaptures 99.97% of dust and allergens
Carpet Shampoo SystemDeep cleans carpets with shampoo and extraction
Upholstery ToolFor cleaning furniture and drapes
Dusting BrushFor delicate surfaces and corners
Powerful MotorEnsures strong suction for effective cleaning
Adjustable HeightFor optimal cleaning on different surfaces
Easy ManeuverabilitySwivel steering for easy navigation
Onboard StorageConvenient storage for attachments

Installation

Unpack and inspect contents. Ensure all parts are included.

  1. Attach the handle: Align and secure the handle to the main body.
  2. Connect the hose: Ensure the hose is firmly attached to the vacuum.
  3. Plug into AC power: Use a grounded outlet for safety.

WARNING! Ensure vacuum is off before connecting or disconnecting attachments.

First-Time Setup

Power on the vacuum; follow the setup instructions.

  1. Check filters: Ensure HEPA filter is installed correctly.
  2. Fill shampoo tank: If using the shampoo system, fill with recommended solution.
  3. Test suction: Turn on the vacuum to ensure proper suction.

CAUTION! Do not operate without a filter; this may damage the motor.

Specifications

Controls and Settings

Access settings via the control panel on the vacuum. Features include power switch, height adjustment, and shampoo mode selector.

Power Switch: Turns the vacuum on and off.

Height Adjustment: Adjusts the brush height for different floor types.

Shampoo Mode: Selects between dry vacuuming and shampooing.

Connecting Accessories

Ensure vacuum is off before connecting accessories.

  1. Attach hose: Align and twist to secure the hose to the vacuum.
  2. Connect attachments: Push firmly to attach desired cleaning tool.

Tip: Store attachments in onboard storage for easy access.

Operating the Vacuum

Follow these steps for effective operation.

  1. Power on: Press the power switch to turn on.
  2. Adjust height: Set the brush height according to the floor type.
  3. Begin cleaning: Move the vacuum slowly for best results.
  4. Use attachments as needed: Switch to the appropriate tool for different surfaces.

WARNING! Do not operate on wet surfaces unless using the shampoo system.

Maintenance and Care

Regular maintenance is essential for optimal performance.

  1. Empty dust bin: Regularly check and empty the dust bin.
  2. Clean filters: Wash or replace filters as needed.
  3. Inspect hoses: Check for clogs or damage.

CAUTION! Unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum complies with all applicable safety standards. For more information, visit the manufacturer's website or contact customer support.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower cord issueCheck power cord and outlet.
Poor suctionClogged filterClean or replace the filter.
Strange noiseForeign objectInspect for and remove any obstructions.
Shampoo not dispensingEmpty tankRefill the shampoo tank.

Reset: Disconnect power for 10 seconds to reset.

Service: Contact customer support for assistance.

Kirby Avalir 2 G10B2 Vacuum Cleaner Manual © - All Rights Reserved 2026